Effects of tire-road wear particles on the adsorption of tetracycline by aquatic sediments.

Tire-road wear particles (TRWPs) are formed by friction between the tire and the road. TRWPs are ubiquitous across the globe, especially in sediments. However, the possible effects of TRWPs on tetracycline (TC) in aquatic sediments are unknown. To investigate the potential role of TRWPs as carriers of co-pollutants, this study investigated the pore surface properties and TC adsorption behavior of TRWP-contaminated sediments and explored the TC behavior in water sediments, as well as the role of aging processes and TRWPs abundance. The results showed that the surface morphology of TRWP-contaminated sediments changed and the adsorption capacity of sediments to TC increased. The TC adsorption capacity of sediments contaminated by 2% TRWPs increased from 3.15 to 3.48 mg/g. Moreover, the surface physical and chemical properties of TRWPs after UV aging changed, which further increased the TC adsorption capacity. The TC adsorption capacity of the sediments contaminated by aged TRWPs increased from 3.48 to 3.65 mg/g. Changing the proportion of aged TRWPs, we found that the adsorption capacity of sediments contaminated by different proportions of TRWPs for TC was 2% > 1% > 0.5% > 4% > blank sediment. These results may contribute to predicting the potential environmental risks of TRWPs in aquatic sediments.

Construction and validation of a predictive model for major adverse cardiovascular events in the long term after percutaneous coronary intervention in patients with acute ST-segment elevation myocardial infarction.

PURPOSE: Construction of a prediction model to predict the risk of major adverse cardiovascular events (MACE) in the long term after percutaneous coronary intervention (PCI) in patients with acute ST-segment elevation myocardial infarction (STEMI). METHOD: Retrospective analysis of STEMI patients treated with PCI from April 2018 to April 2021 in Fuyang People's Hospital. Lasso regression was used to screen the risk factors for the first occurrence of MACE in patients, and multifactorial logistic regression analysis was used to construct a prediction model. The efficacy was evaluated by area under the ROC curve (AUC), Hosmer-Lemeshow deviance test, calibration curve, clinical decision curve (DCA) and clinical impact curve (CIC). RESULTS: Logistic regression results showed that hypertension, diabetes mellitus, left main plus three branches lesion, estimated glomerular filtration rate and medication adherence were influential factors in the occurrence of distant MACE after PCI in STEMI patients (P < 0.05). The AUC was 0.849 in the modeling group and 0.724 in the validation group; the calibration curve had a good fit to the standard curve, and the result of the Hosmer-Lemeshow test of deviance was x2 = 7.742 (P = 0. 459); the DCA and the CIC indicated that the predictive model could provide a better net clinical benefit for STEMI patients. CONCLUSION: A prediction model constructed from a total of five predictor variables, namely hypertension, diabetes, left main + three branches lesions, eGFR and medication adherence, can be used to assess the long-term prognosis after PCI in STEMI patients and help in early risk stratification of patients.

Oxidative polymerization versus degradation of organic pollutants in heterogeneous catalytic persulfate chemistry.

Catalytic polymerization pathways in advanced oxidation processes (AOPs) have recently drawn much attention for organic pollutant elimination owing to the rapid removal kinetics, high selectivity, and recovery of organic carbon from wastewater. This work presents a review on the polymerization regimes in AOPs and their applications in wastewater decontamination. The review mainly highlights three critical issues in polymerization reactions induced by persulfate activation (Poly-PS-AOPs), including heterogeneous catalysts, persulfate activation pathways, and properties of organic substrates. The dominant influencing factors on the selection of catalysts, activation regimes of reactive oxygen species, and polymerization processes of organic substrates are discussed in detail. Moreover, we systematically demonstrate the merits and challenges of Poly-PS-AOPs upon pollutant degradation and polymer synthesis. We particularly highlight that Poly-PS-AOPs technology could be promising in the treatment of industrial wastewater containing heterocyclic organics and the synthesis of polymers and polymer-functionalized materials for advanced environmental and energy applications.

Clinical Application of Tonsillectomy with Preservation of Capsule and Support Tissue.

Objective: The clinical effect of tonsillectomy with the preservation of tonsillar capsule and stent tissue and punctuated suture of tonsillar capsule and stent tissue was analyzed retrospectively. Methods: From January 2013 to January 2022, a total of 960 patients underwent tonsillectomy, consisting of 530 males and 430 females with ages ranging from 4 to 60 years (median age: 11 years). The capsule and scaffold tissues were preserved in all patients during the operation, and the surrounding mucosa, capsule, and scaffold tissues were sutured without tension. Indexes such as operation time, intraoperative blood loss, tonsillar white membrane, incidence of postoperative bleeding, postoperative pain score, and incidence of tonsillar remnant were recorded, and the school attendance of children (≤12 years old) was recorded. Results: The mucosal covering of tonsillar fossa healed well in all patients, and the sutures were completely removed at 4 weeks after reexamination. All patients were followed up for 1-8 years, and there was no residual hyperplasia or residual inflammation. Children under 12 years old could return to school 4 days after surgery without any postoperative complications. Conclusion: Tonsillectomy, preserving the tonsillar capsule and scaffold tissue followed by punctate suturing, offered several advantages: it resulted in less intraoperative blood loss and postoperative pain. Patients could resume a normal diet 6 hours after the surgery without an increased risk of complications. Moreover, it significantly reduced the risk of postoperative bleeding.

Programmable late-stage functionalization of bridge-substituted bicyclo[1.1.1]pentane bis-boronates.

Modular functionalization enables versatile exploration of chemical space and has been broadly applied in structure-activity relationship (SAR) studies of aromatic scaffolds during drug discovery. Recently, the bicyclo[1.1.1]pentane (BCP) motif has increasingly received attention as a bioisosteric replacement of benzene rings due to its ability to improve the physicochemical properties of prospective drug candidates, but studying the SARs of C2-substituted BCPs has been heavily restricted by the need for multistep de novo synthesis of each analogue of interest. Here we report a programmable bis-functionalization strategy to enable late-stage sequential derivatization of BCP bis-boronates, opening up opportunities to explore the SARs of drug candidates possessing multisubstituted BCP motifs. Our approach capitalizes on the inherent chemoselectivity exhibited by BCP bis-boronates, enabling highly selective activation and functionalization of bridgehead (C3)-boronic pinacol esters (Bpin), leaving the C2-Bpin intact and primed for subsequent derivatization. These selective transformations of both BCP bridgehead (C3) and bridge (C2) positions enable access to C1,C2-disubstituted and C1,C2,C3-trisubstituted BCPs that encompass previously unexplored chemical space.

Preparation of chitosan-iron oxide modified sludge-based biochar for effective removal of tetracycline from water: performance and mechanism.

The release of antibiotics has attracted wide attention due to their abuse and discharge. How to remove these emerging contaminants is an urgent need to be solved. In the present study, sludge-based biochar combining chitosan and iron oxide was prepared via municipal sewage sludge. The novel biochar modified with chitosan and iron oxide exhibited satisfying performance in eliminating antibiotics from water. The application of modified biochar combined with activated persulfate (PS) showed a remarkable removal efficiency of 96.98% for tetracycline (TC). Analysis of the surface characteristics of the modified biochar showed the presence of structural defects, dispersed iron oxides, abundant functional groups, a porous structure, and a relatively stable crystal structure. These characteristics attributed significant importance to facilitating the degradation of TC. A series of experimental conditions including preparation temperature (600-900 ℃), reaction temperature (15-45 ℃), contaminant concentration (30-180 mg/L), adsorbent usage (0.1-1 g/L), pH (2-10), and persulfate addition concentration (1-5 mmol) were conducted. The results revealed that the highest removal efficiency was achieved at 96.98% under the conditions of TC concentration at 30 mg/L, reaction temperature at 35 ℃, pH of 4, adsorbent addition amount of 0.6 g/L, and PS concentration of 2 mmol, respectively. Three degradation pathways and seven intermediate products of TC were proposed. Therefore, our study provides a promising approach for developing effective removal of antibiotic pollutants.

A novel frameshift mutation of the endoglin(ENG) gene causes hereditary hemorrhagic telangiectasia in a Chinese family.

PURPOSE: Hereditary hemorrhagic telangiectasia (HHT) is a dominantly inherited disorder that involves epistaxis, mucocutaneous telangiectases, and visceral arteriovenous malformations (AVMs). This study aims to investigate the genetic causes in a Chinese family with HHT. METHODS: HHT was confirmed according to Curaçao's diagnostic criteria. Three patients diagnosed with HHT and healthy members were recruited. Whole-exome sequencing (WES) and sanger sequencing were performed to define the patient's genetically pathogenic factor. RESULTS: The proband presented with recurrent epistaxis, hepatopulmonary arteriovenous malformation, and adenocarcinoma. A novel frameshift mutation (c.1376_1377delAC, p.H459Lfs*41) of the ENG gene was revealed in affected individuals by WES. There was no report of this variant and predicted to be highly damaging by causing truncation of the ENG protein. CONCLUSION: We report a novel variant in the ENG gene in Chinese that extends the mutational and phenotypic spectra of the ENG gene, and also demonstrates the feasibility of WES in the application of genetic diagnosis of HHT.

Rolling circle transcription: A new system to produce RNA microspheres for improving RNAi efficiency in an agriculturally important lepidopteran pest (Mythimna separate).

We applied a new RNA interference (RNAi) system using rolling circle transcription (RCT) technology to generate RNA microspheres (RMS) for targeting two key chitin synthetic pathway genes [chitin synthase A (CHSA), chitin synthase B (CHSB)] in the larvae of the oriental armyworm (Mythimna separate), a RNAi-unsusceptible agriculturally important lepidopteran pest. Feeding the third-instar larvae with the RMS-CHSA- or RMS-CHSB-treated corn leaf discs suppressed the expression of CHSA by 81.7% or CHSB by 88.1%, respectively, at 72 h. The silencing of CHSA consequently affected the larval development, including the reduced body weight (54.0%) and length (41.3%), as evaluated on the 7th day, and caused significant larval mortalities (51.1%) as evaluated on the 14th day. Similar results were obtained with the larvae fed RMS-CHSB. We also compared RNAi efficiencies among different strategies: 1) two multi-target RMS [i.e., RMS-(CHSA + CHSB), RMS-CHSA + RMS-CHSB], and 2) multi-target RMS and single-target RMS (i.e., either RMS-CHSA or RMS-CHSB) and found no significant differences in RNAi efficiency. By using Cy3-labeled RMS, we confirmed that RMS can be rapidly internalized into Sf9 cells (<6 h). The rapid cellular uptake of RMS accompanied with significant RNAi efficiency through larval feeding suggests that the RCT-based RNAi system can be readily applied to study the gene functions and further developed as bio-pesticides for insect pest management. Additionally, our new RNAi system takes the advantage of the microRNA (miRNA)-mediated RNAi pathway using miRNA duplexes generated in vivo from the RMS by the target insect. The system can be used for RNAi in a wide range of insect species, including lepidopteran insects which often exhibit extremely low RNAi efficiency using other RNAi approaches.

Development and Validation of a Novel In Vitro Joint Testing System for Reproduction of In Vivo Dynamic Muscle Force.

In vitro biomechanical experiments utilizing cadaveric specimens are one of the most effective methods for rehearsing surgical procedures, testing implants, and guiding postoperative rehabilitation. Applying dynamic physiological muscle force to the specimens is a challenge to reconstructing the environment of bionic mechanics in vivo, which is often ignored in the in vitro experiment. The current work aims to establish a hardware platform and numerical computation methods to reproduce dynamic muscle forces that can be applied to mechanical testing on in vitro specimens. Dynamic muscle loading is simulated through numerical computation, and the inputs of the platform will be derived. Then, the accuracy and robustness of the platform will be evaluated through actual muscle loading tests in vitro. The tests were run on three muscles (gastrocnemius lateralis, the rectus femoris, and the semitendinosus) around the knee joint and the results showed that the platform can accurately reproduce the magnitude of muscle strength (errors range from -6.2% to 1.81%) and changing pattern (goodness-of-fit range coefficient ranges from 0.00 to 0.06) of target muscle forces. The robustness of the platform is mainly manifested in that the platform can still accurately reproduce muscle force after changing the hardware combination. Additionally, the standard deviation of repeated test results is very small (standard ranges of hardware combination 1: 0.34 N~2.79 N vs. hardware combination 2: 0.68 N~2.93 N). Thus, the platform can stably and accurately reproduce muscle forces in vitro, and it has great potential to be applied in the future musculoskeletal loading system.

Prognosis Analysis of Delayed Call Time for Chest Pain in Patients With Acute ST-Segment Elevation Myocardial Infarction Undergoing Direct Percutaneous Coronary Intervention.

To describe the impact of delayed call time for chest pain in the salvage of ST-segment elevation myocardial infarction (STEMI) patients and its associated independent risk factors, and to identify risk factors associated with cumulative morbidity and mortality in STEMI patients at 4 years after percutaneous coronary intervention (PCI). Retrospective analysis of 398 patients diagnosed with STEMI and treated with emergency PCI within 24 hours of symptom onset in Fuyang People's Hospital from April 2018 to April 2021. The enrolled patients were divided into ≤60 minutes group (193 cases), and > 60 minutes group (205 cases), according to the delayed call time of patients with chest pain. Analysis of basic clinical data, rescue time, and major cardiovascular adverse events in the 2 groups. Multifactorial logistic regression analysis of independent correlates of delayed chest pain calls and Cox proportional risk regression modeling of risk factors for cumulative morbidity and mortality at 4 years after surgery. Compared to the delayed call time ≤ 60 minutes group, the > 60 minutes group had a higher proportion of females, a history of diabetes, rural remote areas, and farmer occupation (P < .05). Binary logistic regression analysis shows the history of diabetes and female as independent risk factors for delayed call time >60 minutes for chest pain. In the delayed call time ≤60 minutes group, the time from symptom onset-to-balloon (S0-to-B) and from symptom onset-to-first medical contact (SO-to-FMC) were smaller than in the delayed call time >60 minutes group (P < .05). The sum of postinfarction angina and major cardiovascular adverse events was lower in the group with delayed call time ≤60 minutes than in the group with delayed call time >60 minutes (P < .05). The Kaplan-Meier survival curve and the survival curve without the occurrence of major adverse cardiovascular events were statistically significant in both groups (P < .05). Multifactorial Cox regression analysis showed that delayed call time for chest pain >60 minutes, left main + 3 branch lesions, and cardiac function Killip ≥ III were all risk factors for cumulative morbidity and mortality at 4 years after PCI in patients with STEMI. Delayed call time for chest pain >60 minutes, left main + 3 branch lesions, and cardiac function Killip ≥ III are all risk factors for cumulative morbidity and mortality in STEMI patients at 4 years after PCI. Reducing the delayed call time for chest pain can improve the long-term prognosis of patients.

Catalytic Pollutant Upgrading to Dual-Asymmetric MnO2 @polymer Nanotubes as Self-Propelled and Controlled Micromotors for H2 O2 Decomposition.

Industrial and disinfection wastewater typically contains high levels of organic pollutants and residue hydrogen peroxide, which have caused environmental concerns. In this work, dual-asymmetric MnO2 @polymer microreactors are synthesized via pollutant polymerization for self-driven and controlled H2 O2 decomposition. A hollow and asymmetric MnO2 nanotube is derived from MnO2 nanorods by selective acid etching and then coated by a polymeric layer from an aqueous phenolic pollutant via catalytic peroxymonosulfate (PMS)-induced polymerization. The evolution of particle-like polymers is controlled by solution pH, molar ratios of PMS/phenol, and reaction duration. The polymer-covered MnO2 tubing-structured micromotors presented a controlled motion velocity, due to the reverse torque driven by the O2 bubbles from H2 O2 decomposition in the inner tunnels. In addition, the partially coated polymeric layer can regulate the exposure and population of Mn active sites to control the H2 O2 decomposition rate, thus avoiding violent motions and massive heat caused by vigorous H2 O2 decomposition. The microreactors can maintain the function of mobility in an ultra-low H2 O2 environment (<0.31 wt.%). This work provides a new strategy for the transformation of micropollutants to functional polymer-based microreactors for safe and controlled hydrogen peroxide decomposition for environmental remediation.

Numerical study of granular flow in a slit funnel with a novel structure to avoid particle clogging.

To solve the problem of particle clogging in slit funnels and to obtain a stable discharge flow rate, we proposed a new funnel structure, namely the slit baffle funnel. We conducted a systematic investigation using the discrete element method (DEM) to study the effects of funnel half-angle θ, outlet width W, and baffle height H on flow rate and flow pattern. We found that the proposed structure could effectively avoid particle clogging and guarantee a continuous and stable flow rate with small outlet width. Under the condition of H >3 d, a bigger flow rate was obtained at a smaller funnel half-angle. This new funnel structure could be applied to solve clogging problems associated with granular matter in the slit geometry in mining, agriculture, food, and pharmaceuticals.

Oral Delivery of Anti-Parasitic Agent-Loaded PLGA Nanoparticles: Enhanced Liver Targeting and Improved Therapeutic Effect on Hepatic Alveolar Echinococcosis.

Background: Alveolar echinococcosis (AE) is a lethal parasitic disease caused by infection with the metacestode of the dog/fox tapeworm Echinococcus multilocularis, which primarily affects the liver. Although continued efforts have been made to find new drugs against this orphan and neglected disease, the current treatment options remain limited, with drug delivery considered a likely barrier for successful treatment. Methods: Nanoparticles (NPs) have gained much attention in the field of drug delivery due to their potential to improve delivery efficiency and targetability. In this study, biocompatible PLGA nanoparticles encapsulating a novel carbazole aminoalcohol anti-AE agent (H1402) were prepared to promote the delivery of the parent drug to liver tissue for treating hepatic AE. Results: H1402-loaded nanoparticles (H1402-NPs) had a uniform spherical shape and a mean particle size of 55 nm. Compound H1402 was efficiently encapsulated into PLGA NPs with a maximal encapsulation efficiency of 82.1% and drug loading content of 8.2%. An in vitro uptake assay demonstrated that H1402-NPs rapidly penetrated the in vitro cultured pre-cyst wall and extensively accumulated in the pre-cysts of E. multilocularis within only 1 h. The biodistribution profile of H1402-NPs determined through ex vivo fluorescence imaging revealed significantly enhanced liver distribution compared to unencapsulated H1402, which translated to improved therapeutic efficacy and reduced systemic toxicity (especially hepatotoxicity and cytotoxicity) in a hepatic AE murine model. Following a 30-day oral regimen (100 mg/kg/day), H1402-NPs significantly reduced the parasitic burden in both the parasite mass (liver and metacestode total weight, 8.8%) and average metacestode size (89.9%) compared to unmedicated infected mice (both p-values < 0.05); the treatment outcome was more effective than those of albendazole- and free H1402-treated individuals. Conclusion: Our findings demonstrate the advantages of encapsulating H1402 into PLGA nanoparticles and highlight the potential of H1402-NPs as a promising liver-targeting therapeutic strategy for hepatic AE.

Tumor Microenvironment-Responsive Hydrogel for Direct Extracellular ATP Imaging-Guided Surgical Resection with Clear Boundaries.

Most solid tumors are clinically treated using surgical resection, and the presence of residual tumor tissues at the surgical margins often determines tumor survival and recurrence. Herein, a hydrogel (Apt-HEX/Cp-BHQ1 Gel, termed AHB Gel) is developed for fluorescence-guided surgical resection. AHB Gel is constructed by tethering a polyacrylamide hydrogel and ATP-responsive aptamers together. It exhibits strong fluorescence under high ATP concentrations corresponding to the TME (100-500 µm) but shows little fluorescence at low ATP concentrations (10-100 nm) such as those in normal tissues. AHB Gel can rapidly (within 3 min) emit fluorescence after exposure to ATP, and the fluorescence signal only occurs at sites exposed to high ATP, resulting in a clear boundary between the ATP-high and ATP-low regions. In vivo, AHB Gel exhibits specific tumor-targeting capacity with no fluorescence response in normal tissue, providing clear tumor boundaries. In addition, AHB Gel has good storage stability, which is conducive to its future clinical application. In summary, AHB Gel is a novel tumor microenvironment-targeted DNA-hybrid hydrogel for ATP-based fluorescence imaging. It can enable the precise imaging of tumor tissues, showing promising application in fluorescence-guided surgeries in the future.

Chitooligosaccharide accelerated wound healing in potato tubers by promoting the deposition of suberin polyphenols and lignin at wounds.

Chitooligosaccharide (COS) is a low molecular weight product of chitosan degradation. Although COS induces plant resistance by activating phenylpropanoid metabolism, there are few reports on whether COS accelerates wound healing in potato tubers by promoting the deposition of phenolic acids and lignin monomers at wounds. The results showed that COS activated phenylalanine ammonialyase and cinnamate 4-hydroxylase and promoted the synthesis of cinnamic, caffeic, p-coumaric, ferulic acids, total phenolics and flavonoids. COS activated 4-coumaric acid coenzyme A ligase and cinnamyl alcohol dehydrogenase and promoted the synthesis of sinapyl, coniferyl and cinnamyl alcohols. COS also increased H2O2 levels and peroxidase activity and accelerated the deposition of suberin polyphenols and lignin on wounds. In addition, COS reduced weight loss and inhibited lesion expansion in tubers inoculated with Fusarium sulfureum. Taken together, COS accelerated wound healing in potato tubers by inducing phenylpropanoid metabolism and accelerating the deposition of suberin polyphenols and lignin at wounds.

Phase Separation in cGAS-STING Signaling: Cytosolic DNA Sensing and Regulatory Functions.

Phase separation is a crucial biophysical process that governs cellular signaling and function. This process allows biomolecules to separate and form membraneless compartments in response to both extra- and intra-cellular stimuli. Recently, the identification of phase separation in different immune signaling pathways, including the cyclic GMP-AMP synthase (cGAS)-stimulator of interferon genes (STING) signaling pathway, has shed light on its tight association with pathological processes such as viral infections, cancers, and inflammatory diseases. In this review, we present the phase separation in cGAS-STING signaling, along with its related cellular regulatory functions. Furthermore, we discuss the introduction of therapeutics targeting cGAS-STING signaling, which plays a pivotal role in cancer progression.

Confined Tri-Functional FeOx @MnO2 @SiO2 Flask Micromotors for Long-Lasting Motion and Catalytic Reactions.

H2 O2 -fueled micromotors are state-of-the-art mobile microreactors in environmental remediation. In this work, a magnetic FeOx @MnO2 @SiO2 micromotor with multi-functions is designed and demonstrated its catalytic performance in H2 O2 /peroxymonosulfate (PMS) activation for simultaneously sustained motion and organic degradation. Moreover, this work reveals the correlations between catalytic efficiency and motion behavior/mechanism. The inner magnetic FeOx nanoellipsoids primarily trigger radical species (• OH and O2 •- ) to attack organics via Fenton-like reactions. The coated MnO2 layers on FeOx surface are responsible for decomposing H2 O2 into O2 bubbles to provide a propelling torque in the solution and generating SO4 •- and • OH for organic degradation. The outer SiO2 microcapsules with a hollow head and tail result in an asymmetrical Janus structure for the motion, driven by O2 bubbles ejecting from the inner cavity via the opening tail. Intriguingly, PMS adjusts the local environment to control over-violent O2 formation from H2 O2 decomposition by occupying the Mn sites via inter-sphere interactions and enhances organic removal due to the strengthened contacts and Fenton-like reactions between inner FeOx and peroxides within the microreactor. The findings will advance the design of functional micromotors and the knowledge of micromotor-based remediation with controlled motion and high-efficiency oxidation using multiple peroxides.

AaCaMKs Positively Regulate Development, Infection Structure Differentiation and Pathogenicity in Alternaria alternata, Causal Agent of Pear Black Spot.

Calcium/calmodulin-dependent protein kinase (CaMK), a key downstream target protein in the Ca2+ signaling pathway of eukaryotes, plays an important regulatory role in the growth, development and pathogenicity of plant fungi. Three AaCaMKs (AaCaMK1, AaCaMK2 and AaCaMK3) with conserved PKC_like superfamily domains, ATP binding sites and ACT sites have been cloned from Alternaria alternata, However, their regulatory mechanism in A. alternata remains unclear. In this study, the function of the AaCaMKs in the development, infection structure differentiation and pathogenicity of A. alternata was elucidated through targeted gene disruption. The single disruption of AaCaMKs had no impact on the vegetative growth and spore morphology but significantly influenced hyphae growth, sporulation, biomass accumulation and melanin biosynthesis. Further expression analysis revealed that the AaCaMKs were up-regulated during the infection structure differentiation of A. alternata on hydrophobic and pear wax substrates. In vitro and in vivo analysis further revealed that the deletion of a single AaCaMKs gene significantly reduced the A. alternata conidial germination, appressorium formation and infection hyphae formation. In addition, pharmacological analysis confirmed that the CaMK specific inhibitor, KN93, inhibited conidial germination and appressorium formation in A. alternata. Meanwhile, the AaCaMKs genes deficiency significantly reduced the A. alternata pathogenicity. These results demonstrate that AaCaMKs regulate the development, infection structure differentiation and pathogenicity of A. alternata and provide potential targets for new effective fungicides.

Impact of digital economy development on carbon emission intensity in the Beijing-Tianjin-Hebei region: a mechanism analysis based on industrial structure optimization and green innovation.

Under the "Digital China" strategy and "Carbon Peaking and Carbon Neutrality" goal, it is significant to explore the carbon reduction effect from the digital economy development in a multi-dimensional way. Based on the panel data of 13 cities in the Beijing-Tianjin-Hebei (BTH) region from 2011 to 2019, this study uses mechanism test model, threshold effect model, and spatial Durbin model which empirically test the influence mechanism and spatial spillover effect of digital economy development on regional CEI. The research found that (1) the digital economy development in the BTH region can reduce regional CEI, and it passes the endogenous test; (2) the digital economy indexes of 13 cities in the BTH region have significantly increased with time evolution, but there is obvious spatial unevenness; the CEI of each city except Tianjin decreases significantly with time evolution, and Tianjin shows a trend of decreasing and then increasing; (3) digital economy has a positive spatial correlation, showing the characteristics of "H-H" and "L-L" clustering. Furthermore, the digital economy has a spatial spillover effect on the CEI of neighboring cities; (4) the digital economy development can promote the industrial structure rationalization and upgrade, improves the urban green innovation quantity and quality, then reduces the regional CEI through them; and (5) the impact strength of digital economy on CEI varies at different threshold intervals of the mechanism variable.

Investigation of the adsorption-desorption behavior of antibiotics by polybutylene succinate and polypropylene aged in different water conditions.

Microplastics (MPs) are widely present in aqueous environments and aged by natural components of complex water environments, such as salinity (SI) and dissolved organic matter (DOM). However, the effects of multicondition aging on the physicochemical properties and environmental behavior of MPs have not been completely investigated. In this study, the degradable MP polybutylene succinate (PBS) was used to investigate the environmental behavior of sulfamethoxazole (SMZ) and was compared with polypropylene (PP). The results showed that the single-factor conditions of DOM and SI, particularly DOM, promoted the aging process of MPs more significantly, especially for PBS. The degrees of MP aging under multiple conditions were lower than those under single-factor conditions. Compared with PP, PBS had greater specific surface area, crystallinity, and hydrophilicity and thus a stronger SMZ adsorption capacity. The adsorption behavior of MPs fitted well with the pseudo-second-order kinetic and Freundlich isotherm models, indicating multilayer adsorption. Compared with PP, PBS showed relatively a higher adsorption capacity, for example, for MPs aged under DOM conditions, the adsorption of SMZ by PBS was up to 5.74 mg/g, whereas that for PP was only 3.41 mg/g. The desorption experiments showed that the desorption amount of SMZ on MPs in the simulated intestinal fluid was greater than that in Milli-Q water. In addition, both the original PBS and the aged PBS had stronger desorption capacities than that of PP. The desorption quantity of PBS was 1.23-1.84 times greater than PP, whereas the desorption rates were not significantly different. This experiment provides a theoretical basis for assessing the ecological risks of degradable MPs in complex water conditions.